You can refer that tree removal could work out to be a life-threatening and dangerous scenario. Do not jump the bandwagon unless you are confident to do things at your own end. It can be dangerous and you can handle things in a safe way. It would be always better to hire the services of professionals who go on to do a great job. If there would be a tree in your premises you can remove it in a proper manner with the right set of tools along with equipment. In this regard knowledge along with planning would be important.
In terms of tree removal process it does have a lot systematic. You would need to undertake a full inspection of the tree. You would need to figure out whether one tree leans over the other. You would need to plan an escape route if the tree does not happen to fall. Do figure out whether does exist any obstacles in the directions of the tree. It would include the other trees, structures along with the surround areas. If you are confident there would be enough area for the tree to fall. There you can go ahead and then start the process. Some of the tools which you would need are hedge, rope, ladder or first aid kit.
Once all the equipment would be ready you can get ahead in order to remove the tree? Knock on the bark a few times. Then all around the tree, you would need to tap. It would help you find how hallow or solid the tree tends to be. In order to cut the tree does look for a less dense area. Now you need to find out which area of the tree you are planning to cut. Look for the area where the tree leans. It would be easy for you to cut that particular portion. Ensure that the area where you cut the tree happens to be lean so that the tree works out to be ok when it does fall down.
A horizontal cut off would be right, as then you can cut ¼ of the tree. Do perform in the area where you would want the tree to fall. In case if you want the tree to fall on the right side, please do it in that inward manner. It may go on to replicate a lemon wedge.
The last stage of tree removal process would be the method of back cut. You would need to do it on the opposite side of the wedge. For sure this would go on to make the tree fall on the complete side. You would need to make it around 1.5 wedges around the cut. Just make it as thick as possible. Just use a wedge in order to ensure that the tree does not fall into the wedge. Do not turn the back of the tree once it begins to fall at the same time.